Crosshair VI Hero内部测试BIOS
1101还是老的AGESA 1002
0079是最新的AGESA 1004A
New beta BIOS 1101
Still AGESA 1002. A couple of bugfixes, most importantly has the safe mode offset voltage fixed (not staying at previous value any more).
New test BIOS 0079
Test BIOS with new AGESA 1004. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking, default value is 53.3 ohm. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.
|