在联想官网找了个WD10SPZX的固件,替换了里面的bin文件刷进去了
先试了刷1K04正常,重启再刷1K06也提示成功,但刷完了还是1K04
这是刷完以后的状态
- "C:\Program Files\smartmontools\bin\smartctl.exe" -x F:\
- smartctl 7.0 2018-12-30 r4883 [x86_64-w64-mingw32-w10-b18362] (sf-7.0-1)
- Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Re
- Device Model: WDC WD4000FYYZ-01UL1B2
- Serial Number: XXXXXXXXXXXXXXXXXX
- LU WWN Device Id: XXXXXXXXXXXXXXXXX
- Firmware Version: 01.01K04
- User Capacity: 4,000,787,030,016 bytes [4.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Jul 15 23:10:21 2019
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (45300) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 490) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x70bd) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
- 3 Spin_Up_Time POS--K 170 158 021 - 10500
- 4 Start_Stop_Count -O--CK 099 099 000 - 1554
- 5 Reallocated_Sector_Ct PO--CK 200 200 020 - 0
- 7 Seek_Error_Rate POSR-K 100 253 051 - 0
- 9 Power_On_Hours -O--CK 085 085 000 - 11049
- 10 Spin_Retry_Count PO--CK 100 100 051 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 099 099 000 - 1527
- 180 Unknown_HDD_Attribute POSR-K 200 200 100 - 0
- 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
- 187 Reported_Uncorrect -O--CK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O---K 058 058 000 - 42 (Min/Max 42/42)
- 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 200 100 000 - 52
- 193 Load_Cycle_Count -O--CK 200 200 000 - 1501
- 194 Temperature_Celsius -O---K 110 109 000 - 42 (Min/Max 15/47)
- 195 Hardware_ECC_Recovered -OS-CK 100 253 000 - 0
- 196 Reallocated_Event_Count PO--CK 200 200 020 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x24 GPL R/O 1 Current Device Internal Status Data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- Device State: Active (0)
- Current Temperature: 42 Celsius
- Power Cycle Min/Max Temperature: 42/42 Celsius
- Lifetime Min/Max Temperature: 15/47 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (3)
- Index Estimated Time Temperature Celsius
- 4 2019-07-15 15:13 ? -
- ... ..(473 skipped). .. -
- 0 2019-07-15 23:07 ? -
- 1 2019-07-15 23:08 42 ***********************
- 2 2019-07-15 23:09 ? -
- 3 2019-07-15 23:10 42 ***********************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 56 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 57 Vendor specific
- Type <return> to exit:
复制代码 |