2602677 发表于 2011-10-20 20:58
请问这个怎么更新啊????
type 'go' to update Magni firmware
type 'go -y' to update Magni firmware with Yes included
type 'go -h -v' to display detailed help screen (this screen)
type 'go -e' to erase every sector that was written
type 'go -w' to erase the whole SPI chip
type 'go -a' to flash only autoload
type 'go -b' to flash only BIOS on MAGNI
type 'go -b -e' to erase only BIOS
type 'go -x' to flash only Firmware on MAGNI
type 'go -x -e' to erase only Firmware on MAGNI
type 'go -v' to show verbose message
type 'go -r' read back SPI content, no flashing
example_hba_info.txt is a sample for user*
All numbers in the hba_info.txt are hex.
The start_addr is the lba in terms of number of sectors.
The size is in terms of number of sectors.
The ssd type is specified as follows:
0 - ssd, 1 - turbo boot, 2 - turbo standby, 3 - turbo hibernation, 4 - recover cd
The ssd attribute specifies whether the os has access to it, bios has access to it or if it is deletable.
* hba_info.txt should be the correct name to use in actual operation
应该是用在DOS下运行GO.BAT |