| Name | Type | Def. Value, unit | Purpose |
| rate_limit_local_peers | bool | false | Limits LAN bandwidth |
| folder_defaults.use_relay | bool | true | Enables/disables the use of relay |
| folder_defaults.use_tracker | bool | true | Enables/disables the use of tracker |
| folder_defaults.use_lan_broadcast | bool | true | Enables/disables LAN broadcast |
| folder_defaults.known_hosts | str | not set | Hosts should be entered as a single line of IP:port pairs (or DNSname:port pairs*) comma-separated (no other delimiters allowed) |
| lan_encrypt_data | bool | true | Forces to encrypt all Sync data flowing in LAN |
| disk_low_priority | bool | false | Forces all disk read-write operations to low priority |
| max_file_size_for_versioning | int | 1000 (MB) | Defines the maximum size of file that will keep its old versions in Archive |
| folder_rescan_interval | int | 600 (sec) | Every folder_rescan_interval Sync rescans folder for changes it could miss with other means |
| sync_max_time_diff | int | 600 (sec) | Maximum time difference allowed between peers. If the actual time difference exceeds this value, Sync won't transfer data and will display an error |
| send_buf_size | int | 128 (MB) | Amount of memory allocated for outgoing data buffer |
| recv_buf_size | int | 128(MB) | Amount of memory allocated for incoming data buffer |
| max_torrent_metadata_size | int | 16 (MB) | Amount of memory allocated for metadata |
| log_size | int | 100 (MB) | Amount of memory allocated for debug logs |
| log_ttl | int | 7 (day) | Amount of time debug logs will be stored |
| profiler_enabled | bool | false | Starts recording data for speed issue analysis. Data is stored in profiler.dat in storage folder, rotated every 10 minutes. Requires client restart to activate. |
| send_statistics | bool | true | Allows Sync to send anonymous statistical metrics. It only collects data like OS and Sync version, whether Sync is active or not, etc. Resilio never collects any private or sensitive info! |
| sync_trash_ttl | int | 30 (day) | Amount of time a file will be stored in the archive |
| config_refresh_interval | int | 3600 (sec) | Controls how often Sync checks for the info about available trackers and relay servers. Can be adjusted to prevent HDD from low-power mode |
| external_port | int | 0 | External (i.e. relative to NAT) port value |
| config_save_interval | int | 600 (sec) | Controls how often settings are saved to storage. Can be adjusted to prevent HDD from low-power mode |
| worker_threads_count | int | 0 | Number of CPU threads to use during indexing. "0" means "use as many threads as possible on all cores available". 1 means one thread only, and so on. *** |
| bind_interface | str | not set (eth0, wlan0, etc or MAC address) | Specifies network interface which will be used by Sync ** |
| enable_file_system_notifications | bool | true | Enables/disables operating system notifications about file update |
| enable_journaling | bool | true | Enables/disables journaling of file changes/file moving (must be 'false' for NAS to be able to sleep) |
| peer_expiration_days | int | 7 (day) | Number of days to pass before a peer is removed from the peer list |
| max_packet_size | int | 32 (Mb) | Maximum allowed packet size containing sync service data (tree nodes, ACLs, etc.) |
收藏
转播
来自苹果客户端
