PCEVA,PC绝对领域,探寻真正的电脑知识
开启左侧

Intel RAID option ROM最新版本下载及教程【组建RAID及IRST推荐】

[复制链接]
Boomer 发表于 2013-3-20 12:45 | 显示全部楼层
wsy2220 发表于 2013-3-18 10:38
uefi的板子换模块更麻烦了

不,是更简单了,原来移植模块是需要根据被移植的 BIOS 来修改汇编代码的,现在只需要直接替换就能用了…
yanzi  楼主| 发表于 2013-3-20 15:58 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
Cleome 发表于 2013-3-20 22:49 | 显示全部楼层
本帖最后由 Cleome 于 2013-3-20 22:51 编辑

我看了多数网站都是说技嘉和微星还有华擎成功的,有没华硕7系主板的成功案例的.我按lz所说的做了也确实更换成功保存好了.但更新了bios还是老样子没变化raid option rom还是11.0.0.1339.我是用的更新工具刷的Bios用ez flash2和usb bios flashback都不行请教该怎么办?
aibo 发表于 2013-3-20 23:10 | 显示全部楼层
好吧,我的asus P8z77v pro和P8P67M pro都升到rst12了

但有个问题,和raid的orom无关。
P8z77v pro的桥接asm1061上接了硬盘后rst程序就无法打开了。除非在bios中把桥接芯片关掉。
另,p8z77v pro 装rst12,进桌面后瞬间蓝屏
yanzi  楼主| 发表于 2013-3-20 23:47 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
yanzi  楼主| 发表于 2013-3-20 23:52 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
aibo 发表于 2013-3-21 17:10 | 显示全部楼层
yanzi 发表于 2013-3-20 23:52
我主板也是有ASM的桥接芯片,我是WIN7 X64原版,安装RST12的驱动也是进桌面蓝屏,安装IRST11的某版驱动正 ...

我没试过关掉asm用rts12会不会蓝屏。

但是开着asm,rts11就报错
aibo 发表于 2013-3-21 17:12 | 显示全部楼层
Cleome 发表于 2013-3-20 22:49
我看了多数网站都是说技嘉和微星还有华擎成功的,有没华硕7系主板的成功案例的.我按lz所说的做了也确实更换 ...

阿叔的最新主板bios貌似上锁了
如果自己改的就无法用官方方法刷新

bios之家有人做过一个小工具,可以刷
Cleome 发表于 2013-3-22 17:05 | 显示全部楼层
终于刷成功了.看了网上很多关于华硕bios的帖子研究出来的.话说华硕现在的bios都有验证功能.一般都要强制刷新才行.我刷的方法还是用的usb bios falshback然后里面放2个改过的bios就是扩展名不同一个是rom还有个cap就可以刷新了.光一个cap刷不了.刷的116版还在试用中
yanzi  楼主| 发表于 2013-3-22 22:36 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
于春辉 发表于 2013-3-23 22:40 | 显示全部楼层
我的主板是P7P55D-E,板载Marvell 9123,Marvell的ROM分为三个部分:
the Marvell 91xx AHCI ROM module
the Marvell 91xx firmware and
the Marvell 91xx bootloader
我在MMTOOL里面也找到了三个,但是不知道分别对应关系,是否可以帮助我?

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
于春辉 发表于 2013-3-23 22:50 | 显示全部楼层
我的QQ76989687,期待你能加我
于春辉 发表于 2013-3-24 11:39 | 显示全部楼层
INTEL部分已经升级成功,RAID option ROM 版本: 10.5.0.1034-RAID option ROM version:  12.0.0.1783
Marvell部分实在搞不明白

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
于春辉 发表于 2013-3-24 12:54 | 显示全部楼层
终于成功了
有图为证

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
于春辉 发表于 2013-3-24 12:55 | 显示全部楼层
Marvell 91xx (SATA3) AHCI/RAID ROM modules:

Download links:
>Marvell 91xx AHCI/RAID ROM v1.0.0.1033< (newest Marvell 91xx AHCI/RAID ROM version, uncompressed size: 28 KB, unchanged usable with DEV_9123)
Compatibility: According to the hex code this actual Marvell 91xx ROM version should support the following DeviceIDs: 9023, 9028, 90A3, 90A8, 9110, 9111, 9120, 9122, 9123, 9125, 9128, 9130, 9171, 9172, 9179, 917A, 9181, 9182, 918A, 9189, 9190, 9191, 91A0 and 91A2.
Attention: Nevertheless it is necessary to open the ROM module with a hex editor and to look into the 3rd line (offset 20) for the correct Marvell AHCI Controller DeviceID of the mainboard. If the system has a DEV_9120 Controller, the hex code has to be "4B 1B 20 91", whereas DEV_9123 needs an "4B 1B 23 91" entry. Other DeviceIDs need a similar alteration of the related hex code pairs. If the Marvell ROM update with this version should fail, the user may have to take another version, which is more specific regarding the DeviceID of the onboard Marvell 91xx SATA Controller (look >here<).
>Marvell 91xx AHCI/RAID ROM v1.0.0.0025< (special Marvell 91xx ROM version for Controllers DEV_9172, uncompressed size: 25 KB, thanks to btester for the files and to flexmuscle for having tested them, for details look >here<)
>Marvell 91xx AHCI/RAID ROM v1.0.0.0025< (special Marvell 91xx ROM version for Controllers DEV_917a, uncompressed size: 25 KB, thanks to btester for the files, for details look >here<)
>Complete Marvell 91xx AHCI/RAID ROM+BIOS module v1.0.1.0025 for AMI UEFI BIOSes< (for Controllers DEV_9191, 9192, 91A1 and 91A2, uncompressed size: 131 KB)

Important remarks:
Update of a Non-UEFI BIOS:
For a correct function of the Marvell 91xx SATA 6G Controller older mainboards with a non-UEFI BIOS need at least 3 different modules within the BIOS:
the Marvell 91xx AHCI ROM module
the Marvell 91xx firmware and
the Marvell 91xx bootloader

If the mainboard BIOS contains these 3 separate components, all of them have to be updated, if the user wants to replace the Marvell 91xx AHCI ROM by a newer version. Usually this should be done by executing the Marvell 91xx firmware tool, which is part of the complete Marvell 91xx Firmware Pack (the actual version 2.2.0.1125b can be downloaded from >here<).
Unfortunately some mainboard BIOSes do not allow to replace the Marvell 91xx BIOS ROM module by running the firmware installer. Users with such mainboard may have to do it with the appropriate BIOS tool.
Here are the actual 3 module files, which can be flashed into an AMI non-UEFI mainboard BIOS with the MMTool by replacing the old ones:
the MV91xx Bootloader module (in non-UEFI AMI BiOSes usually to find within the GUI line ID E6, the actual version 1.0.1.0002b kann be downloaded from >here<, uncompressed size: 51 KB, unchanged usable with DEV_9123, credits go to ZioGTS for the file).
Important: For a proper function the Marvell Bootloader (=E6) module must contain the correct DeviceID of the on-board Marvell AHCI Controller (as the ROM module itself). That is why the Bootloader module has to be customized before being used for an update. Open it with a hex editor and search for the hex code "4B 1B". It should be there 2 times. Then replace the 2 hex code pairs just behind the "4B 1B" by the correct DeviceID hex codes. Examples: The correct hex code for a Marvell Controller with the DeviceID 9120 has to be "4B 1B 20 91", whereas a DEV_9123 Controller needs "4B 1B 23 91".
the MV91xx Firmware module (in non-UEFI AMI BIOSes usually to find within the GUI line ID E7, the actual version 2.2.0.1125b can be downloaded from >here<, uncompressed size: 200 KB, credits go to ZioGTS for the file)
the MV91xx AHCI ROM module itself (non-UEFI AMI BIOS: it is in one of ID20 lines, the download link to the actual version 1.0.0.1033 is above)

Update of an AMI UEFI BIOS:
Many AMI UEFI BIOSes just contain 1 single Marvell 91xx PCI ROM module. It includes everything, which is needed for a proper function of the Marvell 91xx AHCI/RAID Controller. This module is situated within the BIOS file named CSMCORE and can easily been updated with the Aptio UEFI MMTool. The download link to the actual complete module containing the Marvell 91xx AHCI/RAID ROM and the additional Marvell 91xx BIOS is above.
yanzi  楼主| 发表于 2013-3-24 13:08 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
unsword 发表于 2013-3-24 19:22 | 显示全部楼层
系统信息
操作系统名称:Microsoft Windows 8 专业版
操作系统版本:6.2.9200  9200
系统名称:KISS-PC
系统生产商:Gigabyte Technology Co., Ltd.
系统型号:To be filled by O.E.M.
处理器:GenuineIntel Intel64 Family 6 Model 58 Stepping 9 3.401  GHz
BIOS:American Megatrends Inc., F19e

英特尔(R) 快速存储技术企业版信息
安装的软件包:11.7.0.1013
用户界面版本:11.7.0.1013
语言:中文(简体,中国)
RAID option ROM 版本: 11.6.0.1702
驱动程序版本:11.7.3.1001
ISDI 版本:11.7.0.1013

这个,主板是技嘉z77x-ud3h
我这个正常不?
yanzi  楼主| 发表于 2013-3-24 21:56 发自PCEVA移动客户端 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
morningsun 发表于 2013-4-30 18:21 | 显示全部楼层
请问4M的BIOS如何打开?

我的是DFI P55-T3eH9,http://img.dfi.com/Upload/BIOS/CM/P55DK827.zip

打开时显示错误……

感谢!

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
zhang8542 发表于 2013-5-23 21:57 | 显示全部楼层
映泰TZ77B主板按照LZ方法成功修改! 不过暂时没有合适硬盘尝试~
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部