C:\WINDOWS\system32>smartctl -x d:
smartctl 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-win8] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA THNSNH256GCST
Serial Number: Y2CS1031TC1Y
Firmware Version: HTSAN101
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Aug 14 12:29:04 2015
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 14) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O-R-- 100 087 000 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--- 100 100 050 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 12902
10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
12 Power_Cycle_Count -O--C- 100 100 000 - 4857
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 12
169 Unknown_Attribute PO--C- 100 100 010 - 100
170 Unknown_Attribute PO--C- 100 100 010 - 0
173 Unknown_Attribute -O--C- 195 195 000 - 0
175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 187
194 Temperature_Celsius -O---K 070 050 000 - 30 (Min/Max 8/50)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 30
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 30 [29] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 03 58 37 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02035837 = 33773623
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 03 58 37 40 00 00:09:16.214 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 57 47 40 00 00:09:16.211 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 56 57 40 00 00:09:16.208 WRITE DMA EXT
35 03 02 00 ef 00 00 02 03 55 68 40 00 00:09:16.205 WRITE DMA EXT
35 03 02 00 79 00 00 02 03 54 ef 40 00 00:09:16.203 WRITE DMA EXT
Error 29 [28] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 03 21 37 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02032137 = 33759543
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 03 21 37 40 00 00:09:16.011 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 20 47 40 00 00:09:16.007 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 1f 57 40 00 00:09:16.004 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 1e 67 40 00 00:09:16.001 WRITE DMA EXT
35 03 02 00 ef 00 00 02 03 1d 78 40 00 00:09:15.998 WRITE DMA EXT
Error 28 [27] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 79 00 00 02 02 b5 17 40 00 Error: ICRC, ABRT 121 sectors at LBA = 0x0202b517 = 33731863
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 79 00 00 02 02 b5 17 40 00 00:09:15.631 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 b4 27 40 00 00:09:15.628 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 b3 37 40 00 00:09:15.625 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 b2 47 40 00 00:09:15.622 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 b1 57 40 00 00:09:15.619 WRITE DMA EXT
Error 27 [26] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 ef 00 00 02 02 9d 98 40 00 Error: ICRC, ABRT 239 sectors at LBA = 0x02029d98 = 33725848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 ef 00 00 02 02 9d 98 40 00 00:09:15.532 WRITE DMA EXT
35 03 02 00 81 00 00 02 02 9d 17 40 00 00:09:15.530 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9c 27 40 00 00:09:15.527 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9c 27 40 00 00:09:15.507 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9b 37 40 00 00:09:15.504 WRITE DMA EXT
Error 26 [25] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 02 9c 27 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02029c27 = 33725479
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 02 9c 27 40 00 00:09:15.507 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9b 37 40 00 00:09:15.504 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9a 47 40 00 00:09:15.500 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 99 57 40 00 00:09:15.497 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 98 67 40 00 00:09:15.494 WRITE DMA EXT
Error 25 [24] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 02 60 77 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02026077 = 33710199
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 02 60 77 40 00 00:09:15.290 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 5f 87 40 00 00:09:15.287 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 5e 97 40 00 00:09:15.284 WRITE DMA EXT
35 03 02 00 ef 00 00 02 02 5d a8 40 00 00:09:15.281 WRITE DMA EXT
35 03 02 00 81 00 00 02 02 5d 27 40 00 00:09:15.279 WRITE DMA EXT
Error 24 [23] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 02 5b 47 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02025b47 = 33708871
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 02 5b 47 40 00 00:09:15.256 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 5a 57 40 00 00:09:15.252 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 59 67 40 00 00:09:15.249 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 58 77 40 00 00:09:15.246 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 57 87 40 00 00:09:15.243 WRITE DMA EXT
Error 23 [22] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 02 36 9f 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x0202369f = 33699487
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 02 36 9f 40 00 00:09:15.112 WRITE DMA EXT
35 03 02 00 ef 00 00 02 02 35 b0 40 00 00:09:15.109 WRITE DMA EXT
35 03 02 00 79 00 00 02 02 35 37 40 00 00:09:15.107 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 34 47 40 00 00:09:15.104 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 33 57 40 00 00:09:15.101 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 3 (0x0003)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 27/30 Celsius
Lifetime Min/Max Temperature: 8/50 Celsius
Lifetime Average Temperature: 8 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 00 04 00 01 01 00 05 05 00 00 00 00 00 00 00
00 01 00 00 4a c2 c4 02 04 04 00 00 00 00 00 05
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/40 Celsius
Min/Max Temperature Limit: 0/80 Celsius
Temperature History Size (Index): 128 (14)
Index Estimated Time Temperature Celsius
15 2015-08-14 10:22 35 ****************
... ..( 7 skipped). .. ****************
23 2015-08-14 10:30 35 ****************
24 2015-08-14 10:31 ? -
25 2015-08-14 10:32 35 ****************
... ..( 4 skipped). .. ****************
30 2015-08-14 10:37 35 ****************
31 2015-08-14 10:38 36 *****************
... ..( 14 skipped). .. *****************
46 2015-08-14 10:53 36 *****************
47 2015-08-14 10:54 ? -
48 2015-08-14 10:55 36 *****************
... ..( 16 skipped). .. *****************
65 2015-08-14 11:12 36 *****************
66 2015-08-14 11:13 35 ****************
... ..( 34 skipped). .. ****************
101 2015-08-14 11:48 35 ****************
102 2015-08-14 11:49 ? -
103 2015-08-14 11:50 31 ************
104 2015-08-14 11:51 31 ************
105 2015-08-14 11:52 32 *************
... ..( 6 skipped). .. *************
112 2015-08-14 11:59 32 *************
113 2015-08-14 12:00 33 **************
... ..( 7 skipped). .. **************
121 2015-08-14 12:08 33 **************
122 2015-08-14 12:09 ? -
123 2015-08-14 12:10 ? -
124 2015-08-14 12:11 26 *******
125 2015-08-14 12:12 26 *******
126 2015-08-14 12:13 27 ********
127 2015-08-14 12:14 ? -
0 2015-08-14 12:15 31 ************
1 2015-08-14 12:16 32 *************
2 2015-08-14 12:17 33 **************
3 2015-08-14 12:18 33 **************
4 2015-08-14 12:19 ? -
5 2015-08-14 12:20 28 *********
6 2015-08-14 12:21 29 **********
... ..( 3 skipped). .. **********
10 2015-08-14 12:25 29 **********
11 2015-08-14 12:26 30 ***********
... ..( 2 skipped). .. ***********
14 2015-08-14 12:29 30 ***********
SCT Error Recovery Control:
Read: 600 (60.0 seconds)
Write: 600 (60.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 4857 --- Lifetime Power-On Resets
0x01 0x018 6 19578298874 --- Logical Sectors Written
0x01 0x020 6 241403529 --- Number of Write Commands
0x01 0x028 6 15906135250 --- Logical Sectors Read
0x01 0x030 6 216253936 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 33 --- Average Short Term Temperature
0x05 0x018 1 28 --- Average Long Term Temperature
0x05 0x020 1 48 --- Highest Temperature
0x05 0x028 1 14 --- Lowest Temperature
0x05 0x030 1 44 --- Highest Average Short Term Temperature
0x05 0x038 1 15 --- Lowest Average Short Term Temperature
0x05 0x040 1 39 --- Highest Average Long Term Temperature
0x05 0x048 1 21 --- Lowest Average Long Term Temperature
0x05 0x050 4 69100 --- Time in Over-Temperature
0x05 0x058 1 40 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 19556 --- Number of Hardware Resets
0x06 0x018 4 12 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 5 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 18881 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
C:\WINDOWS\system32>
C:\WINDOWS\system32>smartctl -x d:
smartctl 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-win8] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA THNSNH256GCST
Serial Number: Y2CS1031TC1Y
Firmware Version: HTSAN101
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Aug 14 12:29:04 2015
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 14) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O-R-- 100 087 000 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--- 100 100 050 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 12902
10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
12 Power_Cycle_Count -O--C- 100 100 000 - 4857
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 12
169 Unknown_Attribute PO--C- 100 100 010 - 100
170 Unknown_Attribute PO--C- 100 100 010 - 0
173 Unknown_Attribute -O--C- 195 195 000 - 0
175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 187
194 Temperature_Celsius -O---K 070 050 000 - 30 (Min/Max 8/50)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 30
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 30 [29] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 03 58 37 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02035837 = 33773623
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 03 58 37 40 00 00:09:16.214 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 57 47 40 00 00:09:16.211 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 56 57 40 00 00:09:16.208 WRITE DMA EXT
35 03 02 00 ef 00 00 02 03 55 68 40 00 00:09:16.205 WRITE DMA EXT
35 03 02 00 79 00 00 02 03 54 ef 40 00 00:09:16.203 WRITE DMA EXT
Error 29 [28] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 03 21 37 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02032137 = 33759543
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 03 21 37 40 00 00:09:16.011 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 20 47 40 00 00:09:16.007 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 1f 57 40 00 00:09:16.004 WRITE DMA EXT
35 03 02 00 f0 00 00 02 03 1e 67 40 00 00:09:16.001 WRITE DMA EXT
35 03 02 00 ef 00 00 02 03 1d 78 40 00 00:09:15.998 WRITE DMA EXT
Error 28 [27] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 79 00 00 02 02 b5 17 40 00 Error: ICRC, ABRT 121 sectors at LBA = 0x0202b517 = 33731863
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 79 00 00 02 02 b5 17 40 00 00:09:15.631 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 b4 27 40 00 00:09:15.628 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 b3 37 40 00 00:09:15.625 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 b2 47 40 00 00:09:15.622 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 b1 57 40 00 00:09:15.619 WRITE DMA EXT
Error 27 [26] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 ef 00 00 02 02 9d 98 40 00 Error: ICRC, ABRT 239 sectors at LBA = 0x02029d98 = 33725848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 ef 00 00 02 02 9d 98 40 00 00:09:15.532 WRITE DMA EXT
35 03 02 00 81 00 00 02 02 9d 17 40 00 00:09:15.530 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9c 27 40 00 00:09:15.527 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9c 27 40 00 00:09:15.507 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9b 37 40 00 00:09:15.504 WRITE DMA EXT
Error 26 [25] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 02 9c 27 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02029c27 = 33725479
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 02 9c 27 40 00 00:09:15.507 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9b 37 40 00 00:09:15.504 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 9a 47 40 00 00:09:15.500 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 99 57 40 00 00:09:15.497 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 98 67 40 00 00:09:15.494 WRITE DMA EXT
Error 25 [24] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 02 60 77 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02026077 = 33710199
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 02 60 77 40 00 00:09:15.290 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 5f 87 40 00 00:09:15.287 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 5e 97 40 00 00:09:15.284 WRITE DMA EXT
35 03 02 00 ef 00 00 02 02 5d a8 40 00 00:09:15.281 WRITE DMA EXT
35 03 02 00 81 00 00 02 02 5d 27 40 00 00:09:15.279 WRITE DMA EXT
Error 24 [23] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 02 5b 47 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x02025b47 = 33708871
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 02 5b 47 40 00 00:09:15.256 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 5a 57 40 00 00:09:15.252 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 59 67 40 00 00:09:15.249 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 58 77 40 00 00:09:15.246 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 57 87 40 00 00:09:15.243 WRITE DMA EXT
Error 23 [22] occurred at disk power-on lifetime: 43 hours (1 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 f0 00 00 02 02 36 9f 40 00 Error: ICRC, ABRT 240 sectors at LBA = 0x0202369f = 33699487
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 02 00 f0 00 00 02 02 36 9f 40 00 00:09:15.112 WRITE DMA EXT
35 03 02 00 ef 00 00 02 02 35 b0 40 00 00:09:15.109 WRITE DMA EXT
35 03 02 00 79 00 00 02 02 35 37 40 00 00:09:15.107 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 34 47 40 00 00:09:15.104 WRITE DMA EXT
35 03 02 00 f0 00 00 02 02 33 57 40 00 00:09:15.101 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 3 (0x0003)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 27/30 Celsius
Lifetime Min/Max Temperature: 8/50 Celsius
Lifetime Average Temperature: 8 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 00 04 00 01 01 00 05 05 00 00 00 00 00 00 00
00 01 00 00 4a c2 c4 02 04 04 00 00 00 00 00 05
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/40 Celsius
Min/Max Temperature Limit: 0/80 Celsius
Temperature History Size (Index): 128 (14)
Index Estimated Time Temperature Celsius
15 2015-08-14 10:22 35 ****************
... ..( 7 skipped). .. ****************
23 2015-08-14 10:30 35 ****************
24 2015-08-14 10:31 ? -
25 2015-08-14 10:32 35 ****************
... ..( 4 skipped). .. ****************
30 2015-08-14 10:37 35 ****************
31 2015-08-14 10:38 36 *****************
... ..( 14 skipped). .. *****************
46 2015-08-14 10:53 36 *****************
47 2015-08-14 10:54 ? -
48 2015-08-14 10:55 36 *****************
... ..( 16 skipped). .. *****************
65 2015-08-14 11:12 36 *****************
66 2015-08-14 11:13 35 ****************
... ..( 34 skipped). .. ****************
101 2015-08-14 11:48 35 ****************
102 2015-08-14 11:49 ? -
103 2015-08-14 11:50 31 ************
104 2015-08-14 11:51 31 ************
105 2015-08-14 11:52 32 *************
... ..( 6 skipped). .. *************
112 2015-08-14 11:59 32 *************
113 2015-08-14 12:00 33 **************
... ..( 7 skipped). .. **************
121 2015-08-14 12:08 33 **************
122 2015-08-14 12:09 ? -
123 2015-08-14 12:10 ? -
124 2015-08-14 12:11 26 *******
125 2015-08-14 12:12 26 *******
126 2015-08-14 12:13 27 ********
127 2015-08-14 12:14 ? -
0 2015-08-14 12:15 31 ************
1 2015-08-14 12:16 32 *************
2 2015-08-14 12:17 33 **************
3 2015-08-14 12:18 33 **************
4 2015-08-14 12:19 ? -
5 2015-08-14 12:20 28 *********
6 2015-08-14 12:21 29 **********
... ..( 3 skipped). .. **********
10 2015-08-14 12:25 29 **********
11 2015-08-14 12:26 30 ***********
... ..( 2 skipped). .. ***********
14 2015-08-14 12:29 30 ***********
SCT Error Recovery Control:
Read: 600 (60.0 seconds)
Write: 600 (60.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 4857 --- Lifetime Power-On Resets
0x01 0x018 6 19578298874 --- Logical Sectors Written
0x01 0x020 6 241403529 --- Number of Write Commands
0x01 0x028 6 15906135250 --- Logical Sectors Read
0x01 0x030 6 216253936 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 33 --- Average Short Term Temperature
0x05 0x018 1 28 --- Average Long Term Temperature
0x05 0x020 1 48 --- Highest Temperature
0x05 0x028 1 14 --- Lowest Temperature
0x05 0x030 1 44 --- Highest Average Short Term Temperature
0x05 0x038 1 15 --- Lowest Average Short Term Temperature
0x05 0x040 1 39 --- Highest Average Long Term Temperature
0x05 0x048 1 21 --- Lowest Average Long Term Temperature
0x05 0x050 4 69100 --- Time in Over-Temperature
0x05 0x058 1 40 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 19556 --- Number of Hardware Resets
0x06 0x018 4 12 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 5 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 18881 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
C:\WINDOWS\system32>
|
[复制链接]
收藏
转播
